Understanding more about Forklift Batteries

The forklift batteries are made up of many individual cells, used as a source of power when linked together. In older days, the batteries are formed by welding the links between cells but now a day the batteries are linked together by using the bolted connections. This bolted connection forklift battery innovation is safer and more immune to corrosion if compared to welded links. Every cell may also be identified by means of having a vent cap.

The thorough maintenance of the forklift batteries is very significant to their durability. By using the appropriate battery maintenance ways will maintain your forklift investment. These are of heavy in nature, in a case, not handled correctly will become dangerous when in use.

Below there is some discussion which helps to educate you some correct ways to handle the forklift batteries: 

1.       At the time of charging any forklift battery, it is recommended to remove all the metallic objects available near to it. 

2.       While moving these heavy batteries, it is suggested to put on steel toe shoes or some special equipment such as a walkie pallet jack.

3.       The hand and eye washing station should be positively located nearby the forklift trucks, used to remove hazardous liquid come in contact with eyes or hands.

4.       Don’t forget to put on a chemical-resistant protective gear to hold the need for the station at bay.

Why is an appropriate battery charging required?

Properly charging a battery is all about doing it at the right time, for the correct period of time. Use these suggestions when charging your forklift battery: 

1.       Designate a field peculiarly for battery charging.

2.       In a case, a forklift battery has been overflowed then must be rinsed to prevent corrosion.

3.       Charging your forklift battery in extreme hot and cold environment can cause a reduction in batteries lifespan. So charge your forklift battery in proper temperature.

4.       Don’t repeat a common mistake by adding some water to a wet-cell battery just before its charging process. Always add a diluted water after you know about a charge cycle reaches to its proper level.

5.    Keep you cautious when the battery is at charging point if your battery does not include a battery management system to prevent overcharging.

6.       Make sure that the battery charger is powered off before connecting a battery.

This imperative part of a forklift truck should be resulted in the risk-free operations if done as per the above-written precautions.